Difference between revisions of "NKit/NKitFormat"
(→GameCube) |
(→GameCube) |
||
| Line 48: | Line 48: | ||
The Boot.bin (disc header) is modified as above [[NKit/Discs#GameCube_Disc_.2F_Wii_Raw_Partition_Data|other items]] remain untouched. They remain at the same offset also. | The Boot.bin (disc header) is modified as above [[NKit/Discs#GameCube_Disc_.2F_Wii_Raw_Partition_Data|other items]] remain untouched. They remain at the same offset also. | ||
| − | The file system is modified as below | + | The file system is modified as [[NKit/NKitFormat#FileSystem|below]] |
=== Wii === | === Wii === | ||
Revision as of 16:00, 6 September 2019
The NKit Format is a non-lossy format for shrinking and restoring Wii and GameCube images. It supports clean / Redump images as well as scrubbed and hacked images. Some corrupt and bad images are supported too, although these quite often error.
There are 2 NKit output formats, raw (iso) and compressed (gcz). Both were designed with 1:1 preservation, size and playability in mind. Hardware support for Wii was sacrificed for smaller images. WBFS is currently the best available and Recoverable to Redump where not hacked or corrupt.
| System | Format | Hardware Supported | Dolphin Supported | Restorable 1:1 | Notes |
|---|---|---|---|---|---|
| GameCube | nkit.iso | Yes | Yes | Yes | Same as compacted GameCube iso |
| GameCube | nkit.gcz | No | Yes | Yes | GCZ is Dolphin's own block seekable compression format |
| Wii | nkit.iso | No (Dev Kit?) | Yes | Yes | RVT-H format only playable in Dolphin or a Dev Kit (Untested) |
| Wii | nkit.gcz | No | Yes | Yes | RVT-H in GCZ playable in Dolphin only |
NKit Format images contain the bare minimum of data. All junk and scrubbing is removed. Non-uniform data is preserved in 256 byte blocks with a 4 byte header. Wii encryption and hashes are fully recreatable and removed. Meaning any remaining data is as compressible possible.
Contents
Header
NKit places its header at 0x200 in the Wii and GameCube disc headers.
| Offset | Length | Name |
|---|---|---|
| 0x200 | 0x4 | NKit Header 'NKIT' |
| 0x204 | 0x4 | NKit Version ' v01' |
| 0x208 | 0x4 | Source image original CRC32 |
| 0x20C | 0x4 | NKit CRC - makes the NKit file CRC32 equal the source CRC at 0x208 (at 0x4 in GCZ) |
| 0x210 | 0x4 | Source image length |
| 0x214 | 0x4 | Forced Junk ID (When Disc ID differs - rare - GameCube only) |
| 0x218 | 0x4 | Wii Update partition CRC32 if removed when converting |
NKit also modifies the Wii header to set the bytes at 0x60 and 0x61 to 0. This indicates to a Dev Kit and Dolphin that the encryption and hashes aren't present.
GameCube
The Boot.bin (disc header) is modified as above other items remain untouched. They remain at the same offset also.
The file system is modified as below
Wii
FileSystem
Both the GameCube and Wii use the same code to encode the filesystem. The only real difference is that Wii FST file offsets and lengths must be multiplied by 4 when mapping to files. The NKit Format uses a custom Run Length Encoding (RLE) to remove the gaps between files and shrink gaps to 4 bytes in most cases.
