Difference between revisions of "WiiSX compatibility list (beta 2)"

iso tested on USB. Works fine at 60FPS with beta2 Mod02.

Input: must be Standard, analog doesn't do anything

Result: Runs Perfectly. Tested by Commodore.

Result: Runs nearly perfect, although the audio is a bit behind during cut-scenes. There may be times when the audio from cut-scenes that occur later in the game play during regular gameplay and other cut-scenes. Code dumps at Capcom logo before opening scene and title screen. Just press start to skip it.

In level three I get code dump if I enter the flying vehicle or when I get to the boss. Otherwise it's fine but only if I want to play the same two levels over and over. //Fatman

Result: Works flawelessly, a little slow. FPS 35-45 without frameskipping. Playable.

Result: Works perfectly. Playable indeed.

Result: Perfect and full speed, some little framerate drops on some tracks, nothing serious. FPS 55-60 without frameskipping. Playable.

Interpreter Same as Dynarec except it loads the BIOS after it stalls for a bit.

Dynarec: Works almost perfectly at full speed. Environments occasionally turn black to then return to normal. Frame limit ON, Frame Skip OFF, Dithering ALWAYS.

Interpreter: Same as above just slower.

Dynarec: Works almost perfectly at full speed. FMVs lag a lot, so they won't be useful in understanding the story. Sometimes, if you die, your vehicle won't respawn. Frame limit ON, Frame Skip OFF, Dithering NONE.

Interpreter: Same as above just slower.

Result: Runs perfectly.

Result: Runs perfectly. It will restart after the third stage if the game isn't booted through bios.

Result: Music doesn't play during stages,but does during cut scenes other than that it runs just fine.

Result: Runs perfectly.

Result: Make sure Dithering is off. Some slight audio stuttering. This is the English patch version of the game.

Anon: For me, the game messes up when dialogue comes on, and then it seems to play the rest of the dialogue in the game, like in the Tales series. Can't exit the text box or anything.

To Anon: You are more than likely using Eternal Punishment, the actual English version of the game. I received this error as well and Beta 2 is currently unable to play Eternal Punishment. Try to play the English Patch of Innocent Sin.

Result: Minor graphic glitches sometimes when english patched text is onscreen. Other than that, runs very well. CD Swapping or Memory Card Save to CD2 confirmed to work???

Dynarec : Stack Dump at Midway Logo Sequence.

Interpreter : BSOD at Midway Logo Sequence.

Dynarec : Stack Dump at Midway Logo Sequence.

Interpreter : BSOD at Midway Logo Sequence.

Dynarec : Major Pixelation during the Midway Logo sequence which leads to a Stack Dump at the beginning of the Intro.

Interpreter : Again, Major Pixelation during the Midway Sequence, just at a slower FPS. Beginning of the Intro leads to a BSOD.

Works perfectly.

Interpreter: Runs slowly (about 35-45 FPS). But, everything else works just fine.

Same for memory card filename based on disc ID, so it will load the same memory card than the previously played game, or empty name ".mcd" if there is no previous game. if no memory card found, force memory card loading in Current ISO menu. It needs booting through Bios.
Interpreter : A little slow, Best settings : controller Standard, limit FPS Off, Frame skip ON
Dynarec : Perfect with Controller Standard, Limit FPS On, Frame skip ON

Note: Do not use HLE bios or else it will black screen at launch.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default, Boot Through Bios: Yes, Bios: SCPH1001.

Works perfect. Playable at full speed. Lags a little during certain attacks, but hardly noticeable.

Note 1: Certain series in the game will require you to use discs 2 or 3. E.g. Zeta Gundam, Gundam Wing, Etc. If you want to play as one of the other series that require you to use either discs 2 or 3, then follow these instructions (Noob Friendly):

1. Load the "Disc 1" game through bios.

2. Afterwards, go ahead and look for the series you want to play as.

3. After you find the series, look to see what disc is required to play as that particular series.

4. If it says disc 1, then that means you don't have to "switch discs". However if it says Disc 2 or Disc 3. Then BEFORE you press Circle/A to select the series. Press home (Or in some cases ZL+ZR) to get to the WiiSX menu, then select "Current ISO" and from there select "Swap CD". Finally, select Either Disc 2 or 3 and click "resume game"

5. NOW select the series you wanted to play.

Note 2: It is EXTREMELY important that you DO NOT select a series and then "Swap CD". You MUST first swap the disc "If required" THEN select your series, or else your game will say "Please insert Disc 2/3, but it will become unresponsive, until you go to WiiSX menu and select Disc 1 again.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default.

Works great, runs on fullspeed, sometimes the audio gets a little bit laggy but you wont notice it at all.

Note: Run this game trough BIOS, else it will be glitchy and finally it will crash!

Someone else's opinion: I would say this is very playable with these settings, if only for some sluggishness in larger areas.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: On, Dithering: Default.

Intro is very laggy, there is no background music (caused by the CDDA streaming), game freezes sometimes during loading.

Note: Run this game trough BIOS!

Result: Runs near perfect. Minor graphical and audio glitches but runs great.

Result: Runs near perfect. Minor graphical and audio glitches but runs great.

Result: The voice tracks are played before the character says them and after about three minutes into the game, you cannot get pass the white screen where Reid says "Farah Run"

Turn off Event voices using the in-game menu or else it crashes during events.

Interpreter: slight graphic errors Limit FPS off, Frame Skip on

Dynarec causes bad graphic errors

Result: Loads fine, plays opening video but can't get past main menu. Displays black screen with music.

Result: Sound and voices work great, but freezes at the second text box. Home button takes you back to the WiiSX menu.

Result: Runs perfectly. Minor graphical and audio glitches. At some stages a soft, buzzing-like sound plays repeatedly during the music at times, usually at the Dwarf Forest and other stages that share the same track.

Result: Shows the main menu, hangs while loading a level. So, the story and croft mansion aren't playable.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: None.

Result: Runs perfect.

It's strange... the first time I tried it it worked . Only problems were some slight slowering and messed-up FMV's. Since then everytime I try to play it always freezes after the initial video. Should have made a quick savestate...

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default

You can boot trough Bios or directly.

Works pretty good, the audio its scratchy sometimes and the game in some parts gets slow (You can turn the Frame Skip: On but it gets too fast), some graphical issues too but you can play with no problem. No major problems, very playable.

But stack dump when going through the 5th door.

Dynarec: 100% perfect emulation through bios (SCPH-1001), no problems played to the end, menus a little laggy, FPS: 47-49.75 (in-game), Limit FPS On, Frame Skip Off. Title credits are a bit jerky but doesn't affect gameplay.

Interpreter: Slow but playable through bios (SCPH-1001), FPS: 32-37, Limit FPS Off, Frame Skip On.

Dynarec: Perfect in-game with default settings, just a little laggy in the menus.

Interpreter: Same as Dynarec just slower.