Difference between revisions of "WiiSX compatibility list (beta 2)"

Result: Works perfectly. After selecting cheats for a game, press the start button and select "With Codes." When it asks to insert game disc, go into the WiiSX menu and select the "Swap CD" option. Select the respective game and exit out of the WiiSX menu. Press the X button, and Action Replay will boot the game with the selected cheats enabled.

Using MOD 02

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default.

The FMV's in this game are very laggy, the game is playable. There was no background music, I dunno if the game has this.

Note: Run this game trough BIOS!

Dynarec: Works almost perfectly. Frame Limit ON, Frame Skip ON, Dithering NONE.

Interpreter: Same as above but unplayable due to slow speed.

Dynarec: Works almost perfectly. Characters are invisible in dialog box. Frame Limit ON, Frame Skip ON, Dithering NONE.

Interpreter: Same as above but unplayable due to slow speed.

bios or hle dynarec works great...though loading times are damningly long, 5m+

Screen flickers for one second and then freezes at a black screen in both Dynarec and Interpreter. Pressing any button does nothing. You can still access the WiiSX menu though...

Result: Runs perfect.

by Hero: Works like the original

by Hero: Works like the original

Dynarec : Limit FPS: Auto, Frame Skip: On, Dithering: None
First Rip Result: Hangs at title screen once you make a selection.
Second Rip Result: Runs near perfectly, other than the music which sounds slightly off.

Tested by Cyan :
Saving is fast now (It was very slow on beta 1).
Interpreter : Slow 30fps. Best settings : Limit PFS Off, Frame skip On.
Dynarec : Better than interpreter, but still a little slow (35~60pfs). Not playable with frame skip On. Best settings : Limit FPS Off, Frame skip Off.
With Beta2 Mod01 over USB, it's working 100% fine with dynarec+limit+skip

With BIOS: Using the BIOS (SCPH1001.BIN) to load the game plays it MUCH better, less audio skips and it doesn't freeze when entering a battle. The letters while naming a character are visible as well.

Works with BIOS audio skips here and there slight lag on some platforms and slight lag going into battles SOMETIMES besides that runs perfect (tip...PLAY WITH BIOS) Settings: CPU Core: Dynarec; Limit FPS: Auto; Frame Skip: On, Dithering: None Result: Full Speed (50-60 FPS) - Tested by VoltManEXE & Igalacka

by MrKill: FPS ~50 FPS with frame skip off

Enemies in the underwater levels are invisible/nearly invisible, making it difficult to progress.
In Tomb Time (Level 9), objects (e.g. floating platforms, as well as Crash himself) become invisible when they are above a bottomless pit, making it difficult to proceed.

Dynarec: Works perfectly with minor slowdowns. FPS Limit ON, Dithering NONE, FrameSkip OFF.

Interpreter: Perfect but slow and still playable. Soundtrack isn't affected by slowdowns.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default.

This game is playable but there is a small problem, this game uses CDDA audio streaming (for the background music) wich is not implemented in the emulator. So there is no background music.

Note: Run this game trough BIOS!

Interpreter: ~40FPS, Slow, but playable. Sometimes likes to blackscreen at game select, just restart WiiSX.

'Dynarec:' Doesn't boot.

'Interpreter:' Doesn't boot.

Results: Arcade Mode freezes on loading screen. Quest mode freezes after intro text.

Tested by JAMES: Switched to Interpreter, and instead of giving me the code dump error, it just froze while playing two notes of the music over and over.

Tested by lancea34

Not true; it didn't freeze when I encountered Zell. The freezings are random for everybody. Already on disk 2 (UPDATE: Finished the game). How to change disk: before you change disk, it asks you to save. Make that save on memory card slot 2. Exit game and load the next disk and load the save off mem slot 2. You're done.

Result : run almost perfect have some jitter but most part is fine sometimes have graphic glitch of wanzers on the map restart emulator solved this problem

Result: Works perfectly. After selecting cheats for a game, press the start button and select "Start Game." When it asks to insert game disc, go into the WiiSX menu and select the "Swap CD" option. Select the respective game and exit out of the WiiSX menu. Press the X button, and GameShark will boot the game with the selected cheats enabled.

Settings: : Limit FPS: Auto, Frame Skip: Off, Dithering: Default, Boot Through Bios: Yes, Bios: SCPH1001.

Dynarec: The movie intro plays, then the game crashes.

Interpreter: The game immediately crashes, without the movie intro.

Black screen, never loads, tried every combination of emulation modes and video settings, with and without BIOS, never got it to load. Soft resets needed after trying to load

Controls don't respond at main menu on both dynarec and interpreter through bios and not. Main menu background is distorted.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default.

The game boots fine, browsing in the menus does fine too. When you start a game the video gets glitchy, everything goes way too fast and according the FPS meter the game runs in 60 FPS which is false.

Note: Run this game trough BIOS!

Hangs at first loading screen in both Dynarec and Interpreter, through bios and not.

First screen is shown which is then followed by the first FMV which is a garbled mess to then freeze at a black screen in both Dynarec and Interpreter.

Results: Lots of audio and video stuttering. Locks up randomly during dialogue.

Plays perfectly with slight audio fluctuations in intro music.

iso tested on USB. Works fine at 60FPS with beta2 Mod02.

Result: Runs nearly perfect, although the audio is a bit behind during cut-scenes. There may be times when the audio from cut-scenes that occur later in the game play during regular gameplay and other cut-scenes. Code dumps at Capcom logo before opening scene and title screen. Just press start to skip it.

In level three I get code dump if I enter the flying vehicle or when I get to the boss. Otherwise it's fine but only if I want to play the same two levels over and over. //Fatman

Result: Works flawelessly, a little slow. FPS 35-45 without frameskipping. Playable.

Result: Works perfectly. Playable indeed.

Result: Perfect and full speed, some little framerate drops on some tracks, nothing serious. FPS 55-60 without frameskipping. Playable.

Dynarec: Works almost perfectly at full speed. Environments occasionally turn black to then return to normal. Frame limit ON, Frame Skip OFF, Dithering ALWAYS.

Interpreter: Same as above just slower.

Dynarec: Works almost perfectly at full speed. FMVs lag a lot, so they won't be useful in understanding the story. Sometimes, if you die, your vehicle won't respawn. Frame limit ON, Frame Skip OFF, Dithering NONE.

Interpreter: Same as above just slower.

Result: Runs perfectly.

Result: Runs perfectly. It will restart after the third stage if the game isn't booted through bios.

Result: Runs perfectly.

Result: Make sure Dithering is off. Some slight audio stuttering. This is the English patch version of the game.

Result: Minor graphic glitches sometimes when english patched text is onscreen. Other than that, runs very well.

Dynarec : Stack Dump at Midway Logo Sequence.

Interpreter : BSOD at Midway Logo Sequence.

Dynarec : Stack Dump at Midway Logo Sequence.

Interpreter : BSOD at Midway Logo Sequence.

Dynarec : Major Pixelation during the Midway Logo sequence which leads to a Stack Dump at the beginning of the Intro.

Interpreter : Again, Major Pixelation during the Midway Sequence, just at a slower FPS. Beginning of the Intro leads to a BSOD.

Loads to a black screen in both Interpreter and Dynarec, through bios and not. }}

Works perfectly.

Interpreter: Runs slowly (about 35-45 FPS). But, everything else works just fine.

Same for memory card filename based on disc ID, so it will load the same memory card than the previously played game, or empty name ".mcd" if there is no previous game. if no memory card found, force memory card loading in Current ISO menu. It needs booting through Bios.
Interpreter : A little slow, Best settings : controller Standard, limit FPS Off, Frame skip ON
Dynarec : Perfect with Controller Standard, Limit FPS On, Frame skip ON

Note: Do not use HLE bios or else it will black screen at launch.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default, Boot Through Bios: Yes, Bios: SCPH1001.

Works perfect. Playable at full speed. Lags a little during certain attacks, but hardly noticeable.

Note 1: Certain series in the game will require you to use discs 2 or 3. E.g. Zeta Gundam, Gundam Wing, Etc. If you want to play as one of the other series that require you to use either discs 2 or 3, then follow these instructions (Noob Friendly):

1. Load the "Disc 1" game through bios.

2. Afterwards, go ahead and look for the series you want to play as.

3. After you find the series, look to see what disc is required to play as that particular series.

4. If it says disc 1, then that means you don't have to "switch discs". However if it says Disc 2 or Disc 3. Then BEFORE you press Circle/A to select the series. Press home (Or in some cases ZL+ZR) to get to the WiiSX menu, then select "Current ISO" and from there select "Swap CD". Finally, select Either Disc 2 or 3 and click "resume game"

5. NOW select the series you wanted to play.

Note 2: It is EXTREMELY important that you DO NOT select a series and then "Swap CD". You MUST first swap the disc "If required" THEN select your series, or else your game will say "Please insert Disc 2/3, but it will become unresponsive, until you go to WiiSX menu and select Disc 1 again.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default.

Works great, runs on fullspeed, sometimes the audio gets a little bit laggy but you wont notice it at all.

Note: Run this game trough BIOS, else it will be glitchy and finally it will crash!

Settings: Dynarec, Limit FPS: Auto, Frame Skip: On, Dithering: Default.

Intro is very laggy, there is no background music (caused by the CDDA streaming), game freezes sometimes during loading.

Note: Run this game trough BIOS!

Result: Runs near perfect. Minor graphical and audio glitches but runs great.

Result: Runs near perfect. Minor graphical and audio glitches but runs great.

Result: The voice tracks are played before the character says them and after about three minutes into the game, you cannot get pass the white screen where Reid says "Farah Run"

Turn off Event voices using the in-game menu or else it crashes during events.

Result: Loads fine, plays opening video but can't get past main menu. Displays black screen with music.

Result: Sound and voices work great, but freezes at the second text box. Home button takes you back to the WiiSX menu.

Result: Runs perfectly. Minor graphical and audio glitches. At some stages a soft, buzzing-like sound plays repeatedly during the music at times, usually at the Dwarf Forest and other stages that share the same track.

Result: Shows the main menu, hangs while loading a level. So, the story and croft mansion aren't playable.

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: None.

Result: Runs perfect.

It's strange... the first time I tried it it worked . Only problems were some slight slowering and messed-up FMV's. Since then everytime I try to play it always freezes after the initial video. Should have made a quick savestate...

Settings: Dynarec, Limit FPS: Auto, Frame Skip: Off, Dithering: Default

You can boot trough Bios or directly.

Works pretty good, the audio its scratchy sometimes and the game in some parts gets slow (You can turn the Frame Skip: On but it gets too fast), some graphical issues too but you can play with no problem. No major problems, very playable.

But stack dump when going through the 5th door.

Dynarec: 100% perfect emulation through bios (SCPH-1001), no problems played to the end, menus a little laggy, FPS: 47-49.75 (in-game), Limit FPS On, Frame Skip Off. Title credits are a bit jerky but doesn't affect gameplay.

Interpreter: Slow but playable through bios (SCPH-1001), FPS: 32-37, Limit FPS Off, Frame Skip On.

Dynarec: Perfect in-game with default settings, just a little laggy in the menus.

Interpreter: Same as Dynarec just slower.