Search results

Sometimes, it also tells you which settings you should use. For example: In my case, I don't need any particular setting so I'll use the default settings. Now click on the "OK" button.

...convert will be shown. This table allows you to change patching and other settings per ROM per batch. ...ludes 5 options that are really best left as default. They are the default settings that will apply for all ROMs put through the software.

Splash screens cannot be used with Goomba Color. The configurations settings are optional.

...hich is 2x). If i set the speed for anything faster than 2x in the SC(ONE) settings, many games freeze up during/or halfway through booting. The card works gre

|Game works near-perfectly. VBlank. Set GFX Settings to Priority:BG1 BG3:Off Blank:0 BG1:0 BG2:3 BG3:3 BG1(low):1 S1:3 S2:3 S3:1 ...nd at white screens after the Squaresoft logo, a few graphics glitches and settings and items select unviewable. Playable to some part. Try save and load state

...hreads/437843/ Convert WBFS partition to FAT32] and set Wii Backup Manager settings to automatically rename all the converted games.

...used by Administrators and Supervisors. Through the ACP, most of the board settings can be changed, like the forum layout, badword filters, BBcode, smileys, .. ...red users to change their personal board preferences. Usually just called "Settings"

...update its firmware with the firmware of a different region. Typically the settings menu is no longer accessible, but games are still playable, hence, "semi-br

* Go to "Settings" then "Options" then "Programming" * Go to "settings" then "hardware" and check if you choose "JDM Programmer" and com1

...asscard device or Slot-1 flashcard, boot up the FlashMe installation file (Settings may depend on your PassMe or flashcart device, if possible using a Slot-1 f

Also flashes quickly four times when settings are saved to the eprom. * Go to "Settings" then "Options" then "Programming"

...Use this to describe playability, bugs and glitches and to give additional settings if needed. ...when you reach and launch the third stage. No matter what you do and which settings you set, the game freezes.''' '''Working.''' }}

* Check the settings, for example that "Device = Wii" and "Profile = MPEG XXX"

...up=PROMiNENT | Yes | note=Risk of "bricking" even you have 2.2J. Makes Wii settings page inaccessible on 2.2J. For ISO patched with Brick Blocker 1.3: OK }} ...group=VORTEX | Yes | note=Risk of "bricking" even you have 2.2J. Makes Wii settings page inaccessible on 2.2J. For ISO patched with Brick Blocker 1.3: OK }}

| Works on 4.9c, default settings | Works with 4.9c default settings

== Settings for best compatiblity for loaders == * Anti002fix (general settings): enabled

...our device and configure it to show all compatible files (Settings/General Settings/File View/Show Files/Supported or All).

At the lowest level, a computer is just a series of switches with two settings - high voltage and low voltage. By convention, the number 1 represents the

* Per-ROM settings for soft-reset/download play/cheats *Settings are 1, 2, 3, or 4. This is a NDS Lite only feature. Clicking the "light bul

...internal patches loading times may be slightly increased depending on user settings, microSD speed, etc.