Search results

Sometimes, it also tells you which settings you should use. For example: In my case, I don't need any particular setting so I'll use the default settings. Now click on the "OK" button.

...convert will be shown. This table allows you to change patching and other settings per ROM per batch. ...ludes 5 options that are really best left as default. They are the default settings that will apply for all ROMs put through the software.

Splash screens cannot be used with Goomba Color. The configurations settings are optional.

...hich is 2x). If i set the speed for anything faster than 2x in the SC(ONE) settings, many games freeze up during/or halfway through booting. The card works gre

|Game works near-perfectly. VBlank. Set GFX Settings to Priority:BG1 BG3:Off Blank:0 BG1:0 BG2:3 BG3:3 BG1(low):1 S1:3 S2:3 S3:1 ...nd at white screens after the Squaresoft logo, a few graphics glitches and settings and items select unviewable. Playable to some part. Try save and load state

...hreads/437843/ Convert WBFS partition to FAT32] and set Wii Backup Manager settings to automatically rename all the converted games.

...used by Administrators and Supervisors. Through the ACP, most of the board settings can be changed, like the forum layout, badword filters, BBcode, smileys, .. ...red users to change their personal board preferences. Usually just called "Settings"

...update its firmware with the firmware of a different region. Typically the settings menu is no longer accessible, but games are still playable, hence, "semi-br

* Go to "Settings" then "Options" then "Programming" * Go to "settings" then "hardware" and check if you choose "JDM Programmer" and com1

...asscard device or Slot-1 flashcard, boot up the FlashMe installation file (Settings may depend on your PassMe or flashcart device, if possible using a Slot-1 f

Also flashes quickly four times when settings are saved to the eprom. * Go to "Settings" then "Options" then "Programming"

...Use this to describe playability, bugs and glitches and to give additional settings if needed. ...when you reach and launch the third stage. No matter what you do and which settings you set, the game freezes.''' '''Working.''' }}

* Check the settings, for example that "Device = Wii" and "Profile = MPEG XXX"

...up=PROMiNENT | Yes | note=Risk of "bricking" even you have 2.2J. Makes Wii settings page inaccessible on 2.2J. For ISO patched with Brick Blocker 1.3: OK }} ...group=VORTEX | Yes | note=Risk of "bricking" even you have 2.2J. Makes Wii settings page inaccessible on 2.2J. For ISO patched with Brick Blocker 1.3: OK }}

| Works on 4.9c, default settings | Works with 4.9c default settings

== Settings for best compatiblity for loaders == * Anti002fix (general settings): enabled

...our device and configure it to show all compatible files (Settings/General Settings/File View/Show Files/Supported or All).

At the lowest level, a computer is just a series of switches with two settings - high voltage and low voltage. By convention, the number 1 represents the

* Per-ROM settings for soft-reset/download play/cheats *Settings are 1, 2, 3, or 4. This is a NDS Lite only feature. Clicking the "light bul

...internal patches loading times may be slightly increased depending on user settings, microSD speed, etc.

...up, with WiiGator's latest cMIOS (based on MIOSv10). Use internal mode (w/settings at default), with an uncompressed single iso. There may be missing audio, b ...used. 480p doesn't work (GC B launcher bug?). Change tv type in Wii screen settings to 576i or 480i. (NeoGamma R9 Beta 50) MUST force cMIOS or will not work.

| Spotpass and Streetpass not working. The game prompts to go in system settings to accept user agreement.

#Go to the fourth option (settings), then choose the first option (NAND backup) #Go to the fourth option (settings), then the second option (NAND restore)

...= Re apply all the patches after a system soft reboot (for example exiting Settings).

...ttons and it can tell time. ActionWrist has chracter-specific powerups and settings, such as a different background color.

...i||<center>2646</center>|| || ||<center> Works without issues with default settings. Size on hd = 2709280kB. Used [http://gbatemp.net/index.php?showtopic=14259

====Interface Settings==== ====Advanced Settings====

Press Start and select 'patches' to change game-patch settings: Game settings can be set individually.

*Settings are 1, 2, 3, or 4. This is a NDS Lite only feature. Clicking the "light bul ...an leave on the patches and then if a game fails to load, set its per-game settings to Disabled for certain patches. Patches enter an area of RAM which may be

...t to GBA' or return to normal 'DS Menu' (the one that contains Pictochat & Settings)

|'''Individual Game Settings''' |'''Use a FAT32 partition to store settings'''

:Internal name for the 3DS System Settings application. ...most of the time while in 3DS mode. Its version can be seen in the System Settings application of the console.

...rom WD to control the spindown on windows, but none to change the firmware settings on the hdd itself|0}} # Go to Settings (⚙️) → '''Hard Drive Settings''' and click on '''Game/Install Partition'''

| Works perfect, with correct settings.

Puedes conservar tu archivo de "Global Settings" (Ajustes Globales) transfiriendo este archivo a tu instalación actualizad ...Botón de Ajustes del Rom|propiedades]] del ROM y tocando el botón '''Rom Settings'''.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. ...| vc = no | notes = rice tested if it says to remove controller pak go to settings and chooose rumble pak in pak management and restart the rom. }}

#When you see the spinning disc, choose settings

...like some rendering engine settings), press SQUARE to override the game's settings with the default ones again. : A viable alternative. See the above entry for info on speedhacks and settings.

...sure you set the CPU frequency at '5' while in-game and use the frameskip settings recommended on this page for the smoothest gameplay.

...and load that ROM's Wi-Fi settings. Select to automatically configure your settings, and the DS will attempt to connect to your network. The distance from the

...t is an [http://en.wikipedia.org/wiki/INI_file .ini] file which stores the settings listed below. You may choose to keep your "Global Settings" by transferring this file to your new AKAIO updated install. Keep in mind

...now what type of microSD you have. This means that you can use the default settings and the results will be a correctly formatted microSD ready for use in your ..._SysSet_Icon.GIF]] at the bottom center of the screen to get to the system settings.

...bers were also able to customize the look of the portal through their user settings.

...arts Wii after loading screens.<br>Works with WiiFlow 4.1.2, still testing settings. Cutscenes play with sound but in-game voice-overs not working. However has ...480P = | notes = Did not work with the latest USB Loader GX using default settings | conf = 1 }}

...rks perfectly with IOS 250 on USB Loader GX, works perfectly with standard settings (and IOS 249) on Configurable USB Loader. |Confirmed=1 |Date=05th Jul 2011} ...ios 250 and a base of 57. download wiiflow r92a-WiiFlow_250, go into game settings and select IOS 250 otherwise the game wil freeze in jada using GX havn't te

...ader GX. Additional note: to use in USB Loader GX 2.0, go to the game load settings and set the IOS to 224. For Wifi mode, you MUST first have used the Wii Sho

...|GameID=R62P4Q |Size=4.05G |Notes=tested With usbloader GX rev 565 default settings |Confirmed=0 |Date=}} ...|GameID=R62E4Q |Size=4.05G |Notes=tested with usbloader GX rev 874 default settings |Confirmed=0 |Date=}}

...n ios 249. Tested NTSC version on PAL Wii. No need to mess around with any settings. | Confirmed=2 | Date=5Dec2010}}

...een screen. / 4.0E rev12 USBloader gx r559 all options default except game settings error [[002 fix]]: ANTI; work on cios rev10, gx ver 584 with anti 002 on an ...2 fix. Works with cIOS 249 rev 21 (For USB Loader GX). Works with standard settings on Configurable USB Loader. | Confirmed=1 | Date=05th Jul 2011}}

...USB Loader + CFG and activate BLOCK IOS RELOAD. That`s all /Cfg USB Loader settings ios: 223 mload (Cios38), block ios reload on |Confirmed=1 |Date=}}

.../ Tested with d2x-v10-beta52 and USB loader gx version 3.0 r1271 (default settings). |Confirmed=3 |Date=20.09.2020}} .../ Tested with d2x-v10-beta52 and USB loader gx version 3.0 r1271 (default settings). |Confirmed=2 |Date=20.09.2020}}

...|Result=Works |Region=NTSC-U |GameID=R96EAF |Size=1.61G |Notes=(USB Loader Settings. Set the video setting to "Video: Force PAL 60") Will work with wiikey thou

...rks perfectly with IOS 250 on USB Loader GX, works perfectly with standard settings (and IOS 249) on Configurable USB Loader. |Confirmed=0 |Date=05Jul2011}}

..., use cIOS 222, and Error 002 fix (For USB Loader GX). Works with Standard settings and 249 with Configurable USB Loader. |Confirmed=0 |Date=05th Jul 2011}} ...=PAL |GameID=SSQP01 |Size=0.93G |Notes=Tested on USB Loader GX 2.0 with no settings changed. Tested on both a NTSC and PAL Wii (4.3 on both).

...ncher GX). After that, loaded '''USB Loader GX''', went into Red Steel's «settings» and under "Alternate DOL" changed to "ON". Now game works! Im on Softmod/ ...to "default" within the Red Steel 2 mini-configuration menu, 5) save your settings, exit the menu and proceed to play the game. '''(These steps apply to both

...002 fix. Should work on cIOS 249. (On USB Loader GX). Works with standard settings on Configurable USB Loader. |Confirmed=1 |Date=05 Jul 2011}} ...|Size= |Notes=4.0E rev12 USBloader gx r559 all options default except game settings error 002 fix: ANTI |Confirmed=0 |Date=}}

...es=Use USB loader GX v2.2 with cIOS rev21 d2x v6 base 56 no need to modify settings. Is still compatible with 'return to' option enabled |Confirmed=1 |Date=03J ...Type in parental code and open the game in tiled view to see an individual settings button, open that) First time (ONLY) use Alt-Dol from Disc and beneath sele

...and Rev 14. Edit: Working on PAL Wii 4.2e - Cfg USB Loader 52bx2 (default settings) cIOS 249 Rev17. |Confirmed=3 |Date=17Feb2010 }}

...g | NTSC-U | N/A | No test | Tested by Qamic59 (WiiSXRX beta 2.5) <br/> '''Settings:''' Limit FPS: Auto, Frame Skip: Off, Dithering: Default, Boot Through Bios {{ WiiSX | Action Replay Version 4.20 | NTSC-U | N/A | Works | '''Settings:''' Dynarec (Can also run with Interpreter, however at a bit of a slower sp

...notes = Get a message saying unsupported mode on start up. Tried different settings & got nothing. Latest version of usb loader & dml | conf = 1 }}

: Note that v1.1 will not save altered key binding configuration settings properly after powering down the PSP.

...= yes | notes = Online play works, can set language to english but network settings will be in Japanese. | conf = 1 |debugloglink = | triage = }}

...wse to the ROM on gbaemu4DS and launch it. Most ROMs work with the default settings.

...isplayed'' FPS.|Version name here.|If a game needs workarounds or specific settings (outside of frameskip) to play to completion, or has anything else of note. ...the bottom of the top screen. Set the 'Frame Skipping' value in the video settings to 0, then test the game and see if it stays at either 59/60 or 60/60 'emul

==MSET (System Settings)== ...nts access to the 3DS "kernel mode" by launching the DS profile in the 3DS Settings. When the DS profile is launched, it uses a vulnerability in rsa_verify req

...o the list as 'Doesn't Work' having only tested the game with one of these settings enabled, as it's probable the game works flawlessly without it. ...h/italian/dutch/japanese you must force language to English in nintendont settings for the game to work, the game has a dummy language files and nintendont l

# Reboot your console and load up the "System Settings" application from the HOME Menu. # Navigate to ('Settings' -> 'Profile' -> 'Nintendo DS Profile').

* All changes done in EmuNAND Wifi Settings are also applied to SysNAND. ** EmuNAND v7.0.0 can't launch new updated applications (eshop, System settings, etc.)

* All changes done in EmuNAND Network Settings are also applied to SysNAND. ...ge">7.2.0</span> (Launch, but with limited features: System Settings, NNID Settings and eshop are not working)

...s strings. When launching the 3DS System Settings application's DS profile settings editor, it will cause the application that edits the DS profile to crash, a ...ller, but it will fully replace your profile information, except your WiFi settings. You can use [[List of applications for 3DS|ROP Installer Modifier]] to edi

Switch on the 3DS, enter the Settings menu, then the Other Settings menu, the Profile Menu and finally hold the L button while pressing Nintend # Entering settings while in Gateway mode or Gateway Classic mode.

...sed by the GateWay 3DS. The exploit uses a flaw in the Nintendo DS profile settings, where a long nickname or message will cause a stack buffer overflow, crash

Under Toolchain for Indexer Settings, choose a valid Toolchain (eg. Linux GCC)

| colspan="2" | Settings

...Use this to describe playability, bugs and glitches and to give additional settings if needed. ...oots to black screen, system hangs, tried several base roms, tested varios settings in the config ini file, same result. Tested on Loadiine GX2}}

...Use this to describe playability, bugs and glitches and to give additional settings if needed.

**'''A''' - Run a ROM, enter a folder or change a setting in settings. **'''B''' - Go back a folder level or return from settings.

* Added settings home support. ~ at the start of a Path will insert the user's home director

The configuration options in the GUI apps override the equivalent settings in the NKit.dll.config file. * <code><appSettings></code> - General settings

* Settings: Start === Settings ===

...EW" 3DS (N3DS) users can use the MSET Exploit by installing the old System Settings app from 3ds ver 4.5 over the existing one via the .CIA provided in newer G ...tendo DS homebrews. Requires to inject the modified game into the Internet settings for Nintendo DS into the NAND.

...to shut the system down when a reboot is forced (eg. after leaving system settings)

...Use this to describe playability, bugs and glitches and to give additional settings if needed. ...when you reach and launch the third stage. No matter what you do and which settings you set, the game freezes.''' '''Working.''' }}

...Use this to describe playability, bugs and glitches and to give additional settings if needed.

...Use this to describe playability, bugs and glitches and to give additional settings if needed.

...this test was performed on, and the system version as displayed in System Settings.

...Use this to describe playability, bugs and glitches and to give additional settings if needed.

The firmware that your Wii U is on is found in the Settings menu. Please only log the '''firmware that your Wii U came on''', not what ...er the correct region in which it belongs. Your region can be found in the Settings menu directly after the firmware version number.

Proper LCD shutdown, new MPU settings, and other minor adjustments.

#Your Wii’s WiFi MAC Address (can get from your Wii's system settings). This is needed because the Wii will only accept messages addressed to its

| System Settings ...ight be possible (And very dangerous). When we update our NAND via "System Settings" our 3DS is connecting to the Internet requesting the secret URL to downloa

...Use this to describe playability, bugs and glitches and to give additional settings if needed.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

| [[Mini Settings]] | the Mini Settings program that you can't find in 3.60 anymore

This is for listing compatibility with overriding the clock and L2 settings on Luma3DS. Because of the vast number of titles available, please only li

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

A: Navigate to Settings > User Interface > Menu > Menu Icon Theme. Then press right on the D-Pad to

...Use this to describe playability, bugs and glitches and to give additional settings if needed. ...h WiiMote emulation with in-game config for Gamepad. Use Wiimote to adjust settings for New Game.}}

...enough to fix your compatibility problem! You need to set your USB Loader settings to actually USE the IOS slot you want to load for the game which requires i USBLoaders let you change that settings either globally (for all your games), or individually (for one specific gam

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

...Use this to describe playability, bugs and glitches and to give additional settings if needed.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

| Changes graphical settings and/or fps lock. There are many different versions to suit your desire. Som | '''''Xenoblade Chronicles 2''''' - Graphic settings

...a emulator] for Nintendo switch.<br/>'''Update major changelog''': fix hdf settings with non-zero hd dir causing wrong mounted drives; implement .adz floppy di

**Make sure Loading External Firms and Patches are enabled in Luma's settings (hold select when powering up your system). ...lity list states the ROM is working, then disable 'center and mask' in the settings. If you see a ROM intro you have a bad quality ROM. You can remove this by

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

...Use this to describe playability, bugs and glitches and to give additional settings if needed.

# Press R to access the settings and go into Emulation settings and press B twice to go back into the main ingame menu screen. This is to g # Select "Linking Settings" by using the dpad and press A. Press A again to enable wifi linking. This

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

...Use this to describe playability, bugs and glitches and to give additional settings if needed.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. Notes like 'Works Great' are not needed and simply add clutter.

...Use this to describe playability, bugs and glitches and to give additional settings if needed. ...| vc = no | notes = rice tested if it says to remove controller pak go to settings and chooose rumble pak in pak management and restart the rom. }}

...Use this to describe playability, bugs and glitches and to give additional settings if needed. '''Please specify the WiiStation version used.''' ...when you reach and launch the third stage. No matter what you do and which settings you set, the game freezes.''' '''Working.''' }}